LED Tube Lights

Comprehensive application of LED tube lights, a unique circuit control design, thereby achieving a highly efficient energy-saving, energy conversion rate of 93%. Ultra-high brightness, high color-rendering index, is the latest type of indoor lighting products, products 8W/12w/15W, wide voltage, high-life, low power consumption, low heat, effectively reduce the environmental impact, energy-saving emission reduction.

1, direct energy-saving: DC drive, ultra-low power consumption, electro-optical power conversion close to 100%, the same energy-saving fluorescent lighting more efficient than the traditional 70%.

2, indirect energy conservation: As the LED lamp is a cold light source, giving the feeling of cool visual, LED fluorescent lamps only 1% of the energy is converted to heat; Therefore, the same brightness LED fluorescent emitted heat equivalent to the current conventional fluorescent lamp 1 / 20 the corresponding reduced heat in the summer opened air-conditioned room to reduce the frequency, and better meet the energy saving effect.

3, provincial and maintenance costs: Because LED fluorescent lamp life of up to 5 thousand hours, power supply voltage of AC90V-280V (wide voltage, universal), so do not need frequent replacement of fluorescent light tubes, starter and ballast and so on.

4, green: no ultraviolet, infrared ray radiation, there is no risk of mercury leakage.

  5, easy installation: In the traditional lamp rack directly to the installation, remove the starter can be used.

2, the product scope of application:

Applies to: City Tunnel, supermarket shopping malls, schools, factories, offices and other indoor lighting. The length of the LED lamp specifications with the existing fluorescent tube fully compatible, so users do not need to purchase another lighthouse, the installation will remove the existing fluorescent lamp can be replaced with a new type of LED.

1, in the factory production line and City Tunnel: At present, LED daylight tube in full compliance with the general production of the national standard (GB50034-92) illumination of 100-200 lux (Lux) requirements, energy saving, maintenance-free.

2, supermarkets, shopping malls (especially freezer): Environmental non-infrared, the color is good, the food can not only protect the true color of the food show. At the same time, using cold-light source, no additional air conditioning room more conducive to energy conservation, an evident result.

3, school, office space: safe and reliable, no flicker, light soft and pure, to effectively alleviate visual fatigue and protect the eyes. Ultraviolet radiation on the human body without harm.

4, hospitals, municipal buildings, squares and other needs of energy-saving environmental protection, are difficult to maintain the lighting situations.

Third, investment and benefits:

An ordinary 40W fluorescent lamp at startup start-up current to 260mA or so. To start the power reaches 57 watts. When it is half an hour to reach work. At this time current is reduced to around 228mA. The real power of 50.16 watts. To the supermarket, for example day's work 14 hours of calculation, a fluorescent power consumption of the year: 50.16 * 14 * 365 = 249.99 kWh;

15-watt LED lamp startup current of 72mA or so, the actual power of 15.8 watts. And it starts it work. To work for 14 hours a day basis, an LED lamp power consumption of the year: 15.8 * 14 * 365 = 80.73 degrees electricity.

Year, an LED lamp, compared with ordinary fluorescent lights to conserve electricity 169.26 kWh. To a dollar of electricity tariff calculation. A year to save 169.26 * 1 = 169.26 yuan.

T10 LED tube
Item: LT-01
T10 LED tube lights
6W, 12W, 15W,18W are possible
Diameter: 30mm
Length: 60cm,120cm, 150cm
Lamp holder: G13

T8 SMD LED tube
Item: LT-02
T8 SMD LED tube lights
SMD 3528
12W, 16W ... are possible
Diameter: 26mm
Length: 60cm,120cm
Lamp holder: G5

T8 SMD tube
Item: LT-03
T8 SMD LED tube lights
SMD 3528
8W 12W 15W 18W are possible
Diameter: 26mm
Length: 60cm,90cm 120cm 150cm
Lamp holder: G5

Specifications commonly used fluorescent T8, T5, T4 lamp, companies use a group of three lamps is the T5 lamp is usually a very early specifications commonly used fluorescent T10, T12.

"T", on behalf of "Tube", said the tube, T behind the numbers indicate the tube diameter. T8 is that there are 8 "T", a "T" is a 1 / 8 inches.

One inch equals 25.4 mm. Then each a "T" is 25.4 ÷ 8 = 3.175mm

T12 lamp diameter is (12 / 8) × 25.4 = 38.1 mm

T10 is the diameter of tube (10 / 8) × 25.4 = 31.8mm

T8 lamp diameter is (8 / 8) × 25.4 = 25.4mm [T8's is exactly one inch in diameter of the tube] (Note: The uniform width of 39mm, height 52mm)

Commonly used fluorescent length and power: (20w length 620mm; 30w length 926mm; 40w length 1230mm)

T5 lamp is the diameter (5 / 8) × 25.4 = 16 mm (Note: The uniform width of 23.5mm, height 39mm)

Commonly used fluorescent length and power: (8w length 310mm; 14w length 570mm; 21w length 870.5mm; 28w long 1170.5mm; 35w length 1475mm)

T4 is the diameter of tube (4 / 8) × 25.4 = 12.7 mm (Note: The uniform width of 21mm, height 32mm)

Commonly used fluorescent length and power: (8w length 341mm; 12w length 443mm; 16w length 487mm; 20w length 534mm;

22w length 734mm; 24w length 874mm; 26w length 1025mm; 28w length 1172mm)

T3.5 lamp diameter is (3.5 / 8) × 25.4 = 11.1 mm

T2 is the diameter of tube (2 / 8) × 25.4 = 6.4 mm

Led fluorescent tubes are manufactured in accordance with the ordinary lamp specifications, which specifications as large as the same may not change under the premise of the stent easily replace the ordinary LED fluorescent lamp to achieve the environmental protection energy-saving, help to save replacement costs.

Home | About | News | Know How | Products | Services | Wholesale | Contact Us

Copyright © 2005-2009 WWW.ENERGYER.COM All Rights Reserved